Pour de l'aide ou passer commande (514) 878-TAPE sans frais au (800) 777-1927 ou par courriel info@duplication.ca

Pressage vinyle 12po

Joel Plaskett Three Vinyl
Joel Plaskett - Three
Triple LP in custom gatefold

Buck 65 Vinyl

Buck 65 - Vertex
Over 30 minutes per side

Sonic Avenues

Sonic Avenues

Contact us for quotes at infos@duplication.ca
or call 647.478.4273 or 514.878.8273

 

 

Some jobs we've done

The Pygmies Vinyl

The Pygmies

FM Attack Vinyl

FM Attack

Asif Illyas Vinyl

Asif Illyas

Eden Fineday Vinyl

Eden Fineday

Jessica Rhaye Vinyl

Jessica Rhaye

Steven Page

Steven Page

Ryan Driver Quintet Vinyl

Ryan Driver Quintet

Klo Pelgag Vinyl

Klo Pelgag

Joel Plaskett Truthfully Vinyl

Joel Plaskett - Truthfully

 

Zebrassieres

Zebrassieres

Chris Davis

Chris Davis

Dinner Belles

Dinner Belles

Les Chiens

Les Chiens

 

Animal Nation

Steve Poltz

Steve Poltz

The Visitors

Ben Caplan clear vinyl, gatefold:

Click the picture to visit his site

Ben Caplan Vinyl

 

A few notes about vinyl labels:

Labels are not adhesive labels - they are pressed into the vinyl at high temperature.
The labels must be baked to remove moisture - during the baking there will be some colour shift most noticeable on pastel types of colours.

White labels will be off-white due to the baking process.

 

 

WHITE LABEL PROMO

100 12" Vinyl Records $XXX
Includes plain white labels and a white or chipboard jacket

vinyl white label promotion

 

Includes:

  • Economy lacquer mastering up to 16 minutes per side
  • 1-Step Stampers
  • 130 gram 12 inch records (180 gram available as an option)
  • You can have jackets with or without center holes
  • Test pressing is extra cost with this package
  • Repress may not be possible

 

See more options and order online:

 

 

 

sam vinyl

Here's Fernando with some of his recent vinyl projects: Ever-Lovin' Jug Band, Karim Ouellet, Gregory Charles, and Alex Cuba.

 


33 or 45 RPM?

If your record is under 12 to 16 minutes per side you have the option of cutting it at 45 RPM for enhanced sound quality. At 45 RPM the record is turning faster so there's just more groove area for the music. It's analogous to the way an mp3 sounds better at 192 kbps compared to 128 kbps.

12 Inch Singles and EPs

Putting just one or two songs on a side will you give you the best possible sound quality. A 12" single will sound much better than a 7" single.

REFERENCE CUTS

You can request a reference cut before committing to lacquers, stampers, and test pressing. A reference cut (aka dub plate) is almost the same cost as a lacquer.

 

Steps to make a vinyl record:

Vinyl record pressing can be a slow process. Here are the steps involved in making records:

 

Audio Mastering:

Your mix engineer should prepare a mix knowing it will be destined for vinyl. To get the best sound and playing time on vinyl:
- pan the bass to the center and consider that bass frequencies will use up a lot of space on the record. If you want to exceed 20 minutes per side the bass may have to be reduced.
- cut back the level of the cymbals and other high frequencies
- put the highest-energy mixes at the start instead of the end of a side
- don't use any out-of-phase effects
- a typical overly loud CD mix will use up a lot of space on vinyl, so the volume will just have to be reduced to compensate. You might as well make an enjoyable normal mix with good transients instead of a super-loud squished mix. To make a loud vinyl the ideal solution is to put less music per side.

File specs:

For best results supply one digital file for each side with a cue sheet file. If you supply a separate file for each song you have to tell us if we are supposed to insert extra space between every song. We accept files in 16 or 24 bit, and sampling rates of 44.1, 48, 88.2, and 96 kHz.

- a normal 12" record is about 16 to 20 minutes per side, and acoustic music can be cut with little compromise. The more extreme your music and the more you exceed 20 minutes, the more you have to be careful in your mix.

We can also accept 2-track analog reel-to-reel tape at 7.5, 15 or 30 inches per second (transport and setup fees will apply to send your reels to the mastering engineer). We can cut analog 15 and 30 ips masters without converting to digital.

Lacquer Mastering

Once we have your audio in a suitable format with clear instructions as to the spacing between songs, we're ready to cut the lacquers. Lacquers are an aluminum plate coated with lacquer, and your audio is cut into the surface in real-time to make the "master" image which will be sent for electroplating to create the stampers. Lacquers are cut on a machine called a lathe and there are quality differences between a 1950s system compared to the latest generation 1980s lathes and electronics. For the best quality we want to do this on a Neumann lathe equipped with the latest and best quality electronics.

cutting a lacquer on a lathe

The primary job of the lacquer-cutting engineer is to transfer your mix with the minimum amount of compromise and with the best possible sound quality. We have partnered with mastering engineers with many years of experience who are confident in cutting sides up to and over 30 minutes. If you want audio mastering, sequencing, fades, compression, EQ... that is also available at additional cost.

 

 

Dub Plates - Acetates - Reference Cuts

dub plate

If you want one record for evaluation you can buy a single dub plate, also known as an acetate or reference cut. Lacquers and dub plates are practically the same cost since the main cost is studio time. You can get a discounted rate if you commit in advance to a full pressing job. If this is the first time you are pressing vinyl you can order a reference cut to see how your mix transfers to vinyl before dropping $700 on lacquers and stampers.

Stampers

Your lacquers are sent to an electroplating facility to make metal stampers. One stamper is required for each side of your record, and each stamper is good for about 1000 to 1200 regular-weight vinyl records. If you want to make 2000 records, you must buy 2 stampers per side. For heavy-weight 180-gram records, each stamper is only good for about 500 to 600 records. Stampers are only guaranteed for the first run. Our standard packages include the 2-step stamper process so we can make several stampers from one lacquer.

Test Pressing

Once the stampers are ready, it is customary to make test pressings. You can skip this step at your risk (you benefit by saving time and money).

 

Labels

Paper labels are required for each side of your record. You supply the artwork. Please advise if you want 1 colour, 2 colour, or full colour labels.

Inner Sleeves

Plain white paper sleeves are included with your records. You can upgrade to poly-lined sleeves, poly sleeves, or custom-printed inner sleeves.

Jackets

We also print full-colour cardboard jackets with your artwork. Our jackets are printed in Canada.

Pressing

Once you have approved your test pressing the machines are started to press your records.

Packaging and shrinkwrap

Your records and jackets are then inspected, assembled, and shrinkwrapped.

Boxing and shipping

Finally your records are packed into shipping cartons and shipped to you or your distributor.

Prices

Don't hesitate to contact us for a custom quote on record pressing!

Toronto 647-478-4273 / Montreal 514-878-8273

* NB: Turntimes are only estimates and targets. The turntime is not guaranteed and we are not liable for any "lost sales" or other expenses due to missing your release date. If lacquers or stampers have to be redone this adds some weeks to the process.

 

 

 

Analogue Media Technlologies Inc. (Amtech, duplication.ca)
Administration: Île des Soeurs, QC Canada H3E 1A8
Toronto:200-A Middlefield Road, Scarborough ON M1S 4M6
Sans frais (800) 777-1927 À Montréal (514) 878-8273 Email info@duplication.ca
Tout le contenu ©2000-2023 Analogue Media Technologies Inc. (Amtech) Tous droits réservés.